Hello, and thank you for supporting Magpie Pedals and getting yourself one of my effect pedals!
The pedal uses 9VDC power (2.1mm jack: center-negative).
Info:
The Expression Multiplier is just what it sounds like. You connect an expression pedal to the “I” inputs, and then you have multiples of that expression coming out from the “O” outputs.
Controls:
The left-hand “I” Jacks: There is one WHITE and one RED input. The configuration of these are set by the big switch with the red ring around it (underneath the “I” jacks):
- With the switch in its DOWN position the WHITE input comes out of the four WHITE outputs and the red input comes out of the four RED outputs.
- With the switch in its UP position the WHITE inputs get disconnected and the RED input now comes out of all eight outputs.
The “O Switches”: The big switches underneath each pair of “O” outputs work like on/off switches for the outputs. So you can hook up your expression to a bunch of things and choose to sometimes disengage these connections - basically to make cable management less of a nightmare! Simple but effective, if you ask me!
Enjoy!